Nylon conveyor belts must be placed in rolls during storage and must not be folded. The storage period should be turned once every season.
In order to reduce the impact and wear of the material on the tape, the feeding direction should follow the working direction of the tape; the drop of the material falling on the tape should be minimized; the feeding port should avoid directly above the drum or roller; the tape receiving section Should shorten the roller distance and adopt a buffer method. In order to prevent the tape from being scratched, the contact part between the scraper cleaning equipment and the unloading equipment of the stopper equipment and the tape should be made of rubber plates with suitable hardness, and not the tape heads with cloth layers.
The connection between the diameter of the transmission roller of the conveyor and the cloth layer of the conveyor belt, the matching of the transmission roller to the reversing roller and the request for the roller groove angle should be selected according to the planning rules of the conveyor.
Prevent the tape from being blocked by the frame, pillar or block material, and prevent it from breaking and tearing.
In the process of use, prevent the roller from being covered by the material, and prevent the leakage of the material from being stuck between the roller and the belt. Pay attention to the lubrication of some activities, but do not oil the conveyor belt.






