How To Choose The Right Type Of Heat Resistant Conveyor Belt

Heat-resistant conveyor belt is made of multi-layer rubber cotton canvas (polyester cotton) or polyester canvas covered with high temperature or heat resistant rubber, high temperature vulcanization bonded together, suitable for conveying 175℃ below hot coke carbon, cement, slag and hot castings. The type of conveyor belt is selected according to the temperature, surface structure shape and viscosity of the material transported by the heat-resistant conveyor belt. For example, when the conveying temperature is 150℃ sintered ore, coke and other large materials, and the contact area between the material and the band surface is small, the band surface temperature is maintained at 60-80℃; When the conveyor belt transmits cement powder and other materials with low viscosity, the difference between the material temperature and the band temperature is very small, and the band temperature is closely related to the service life of the tropical resistance. Directly affect the adhesive strength between the covering glue and the core layer, the wear resistance of the covering glue, and the cracking resistance, etc., should be fully investigated and measured after the use conditions such as the surface temperature of the belt, the type of tropical resistance should be selected. Thicker covering glue is an important condition to ensure that the tape has a long service life, it is recommended that the cover thickness of tropical resistance 6-9mm, the lower force of 35 4mm.