① Automatic roller deviation adjustment. When the deviation of the conveyor belt is not large, the self-aligning roller can be installed at the place where the deviation of the conveyor belt is greatest.
② Single-side vertical roller deviation adjustment, the conveyor belt always deviates to one side, and several vertical rollers can be installed in the deflection range of the deviated side to reset the conveyor belt.
③ Adjust the deviation with moderate tension. When the conveyor belt deviates from left to right and the direction is irregular, it indicates that the conveyor belt is too loose. The tensioning device can be adjusted appropriately to eliminate the deviation.
④ Adjust the roller deviation, the conveyor belt runs off the roller, check whether the roller is abnormal or move, adjust the roller to the horizontal position and rotate normally to eliminate the deviation.
⑤ Correct the deviation of the conveyor belt joint. The deviation of the conveyor belt is always in one direction, and the maximum deviation is at the joint. The conveyor belt joint can be corrected to be perpendicular to the center line of the conveyor belt to eliminate the deviation.
⑥ Adjust the deviation of the raised rollers, the conveyor belt runs in the direction of deviation, and the distance is fixed. Several groups of rollers can be raised on the opposite side of the direction of deviation to eliminate the deviation.
⑦ Adjust the deviation of the idler roller, and the deviation direction of the conveyor belt is certain. Check that the center line of the idler roller is not perpendicular to the center line of the conveyor belt, and the idler roller can be adjusted to eliminate the deviation.
⑧ Eliminate the slime adjustment, the conveyor belt deviation point remains unchanged, and it is found that the roller drum is sticking to the slime, it is necessary to eliminate the slime adjustment.
⑨ Correct the feed deviation, the conveyor belt will not run deviation under light load, and the heavy load will run deviation. The feed weight and position can be adjusted to eliminate deviation.
⑩ Correct the deviation of the bracket, the direction of the conveyor belt's deviation, the position is fixed, and the deviation is serious. The horizontal and vertical degree of the bracket can be adjusted to eliminate the deviation.
