What are the consequences of belt damage

1, the conveyor belt is thin, it is not easy to lap the conveyor belt, so that its thickness is thinner, in the two end lap, the joint thickness is different, the operation of the joint and the roller generated strong scratch, not only wear the roller, but also shorten the life of the joint, especially the new belt and the old belt lap is more convex. For the conveyor belt connected by vulcanization method, because the thickness is not the same, the lap is more difficult.
2, the intensity of the conveyor belt fall. The high-temperature conveyor belt is made of multi-layer rubber cotton canvas (polyester cotton) or polyester canvas covered with high-temperature or heat-resistant rubber, which is bonded together by high temperature vulcanization, suitable for conveying hot coke carbon, cement, slag and hot castings below 175℃. When the conveyor belt damage reaches a certain level, especially the deep and core layer after the covering layer is damaged, it directly affects the tensile strength of the conveyor belt and causes its strength to drop. When the conveyor belt of the steel rope core is damaged to the core layer, it may cause the core to rust and lose its due strength. When the conveyor belt with deteriorating strength suddenly increases its load in the process of operation, for example, when the truck is started with load and the cassette tape, it is very easy to produce the conveyor belt fracture incident.
3, conveyor belt deviation. When the damage levels on both sides of the conveyor belt center line are different, the tensile rate on both sides often changes, which directly causes the conveyor belt to run off during operation.