Nylon conveyor belt adhesive selection skills

Nylon conveyor belt adhesive selection skills
Nylon conveyor belt is widely used in mining, coal field, chemical industry, metallurgy, construction, port and other departments. Nylon conveyor belt is suitable for conveying non-corrosive non-spiky block, granular, powder of a variety of materials at room temperature, such as coal, coke, sand, cement and other loose materials (materials) or pieces, conveying a variety of bulk density of 6.5~2.5t/m3, granular, powder and other loose materials, can also be used for adult goods transportation.
Selection of adhesives and their sizing Adhesives are generally bottled and should be paste after mixing with hardener. The adhesive used for bonding conveyor belt joints should be thinner. Because the thin coating is not easy to flow and creep, the probability of bubbles and defects is smaller, and the internal stress at the interface will be smaller. Therefore, it is beneficial to improve the adhesion of the interface. However, when the adhesive layer is too thin, it is easy to form a lack of glue, and the coating is not continuous, which can also reduce the bonding strength. Therefore, when applying the adhesive, the coating thickness should be as thin as possible under the premise of ensuring no lack of glue. The determination of bonding time when the two parts of the interface are bonded will directly affect the effect of bonding.