Can make all kinds of bulk materials in 0-90 degrees for any Angle of continuous transport, with large transport Angle, wide range of use, small footprint. No transfer point, reduce civil investment, low maintenance costs, large throughput, etc., to solve the ordinary conveyor belt or pattern conveyor belt can not achieve the transmission Angle.
The corrugated flange conveyor belt can be designed as a complete conveying system according to the requirements, avoiding intermittent conveying and complex conveying lifting system.
The corrugated conveyor belt can transport a variety of bulk materials, from coal, ore, sand to fertilizer and grain, in horizontal, inclined, vertical and variable Angle directions.
Features
1. High tensile strength:Steel cord conveyor belt is suitable for large span,long distance transportation of materials
2. Small elongation in use:It need only a very short take-up stroke distance.
3. Small diameter of drive pulley:Steel cord conveyor belt body has a layer of longitudinally arranged steel cords as its skeleton,and thus is resistant to flex fatigue.Therefore,drive pulley of smaller diameter can be used to make the equipment smaller.
4.High adhesion between rubber and steel cord:The steel cords are coated with zinc on their surface,and also the rubber used has the property of qood adhesion with steel cords.Therefore,the rubber is tighrly adhered to the steel cords and is resistant to shock and difficult to drop,so the rubber belts are long in life.
0-90 degree corrugated sidewall conveyor belt
1. Ply: 1-10plies
2. Width: 120-2200mm
3. Thickness: 6-40mm
4. Cover Tensile Strength: 9-25MPA
Cleat of sidewall conveyor belt
Cleat types: T, TC
The cleat is made of enforced fabric, solid, anti-shock to avoid distortion.
"T" cleat are normally used up to 40 degree
"TC" normally used from 0 degree to 90 degree
Properties of cleat conveyor belt
Corrugated sidewall belts for transport of bulk goods
Saves space, since conveyance at inclines of up to 90° Is possible
Material conveyed is protected
Extremely high stability is provided in the traverse direction, good longitudinal flexibility
Different feed and discharge directions are possible by rotating the vertical runs
Applications of large angle conveyor belt
(Corrugated Sidewall conveyor belt) Large Angle Conveyor belt is widely used in Metallurgy, Mining, Electricity, Coal, Foundries, Construction, Food, Cement, Fertilizer, Copper, Pig Iron Ores, Sponge Iron Reserves etc.
| Product name | Sidewall Conveyor Belt |
| Material | Natural Rubber,Polyester,nylon fabric,Steel cord PVC/PUPE,Plastic etc. |
| Functions | Eficiently transport large quantities of materials and products |
| Production standards | GB/T7984-2001DIN22102,ISO-10247,BS-490,IS 1891,AS-1332,RMA,ARPM,JIS-K6322,SABS-1173etc. |
| Top+Bottom thickness | 3+1.5,4+2,4+1.5,4+3,5+1.5.6+2,7+2,8+2 |
| Belt thickness(mm) | 3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,12mm,15mm,20mm,25mm |
| Belt width(mm) | 500,600,650,700,800,1000,1200,1400,1500,1800,2000,2200,2500 |
| Belt length(m) | 10,20,50,100,200,250,300,500 |
| Belt edge type | Oulded(sealed)edge or cut edge |
| Cover Rubber grade | Rma1,Rma2,DIN-W,DIN-X,DIN-Y,DIN-K |
| Optional cover type | Flame-retardant,Heat resistant,Oil resistant,Cold resistant,Chemical resistant Supplied either with cut or moulded edges |
| Base Belt Width mm |
Sidewallheight mm |
Cleat Height mm |
Sidewall width mm |
Space between sidewall mm |
Space between sidewaland base belt mm |
| 300 | 40 | 35 | 25 | 180 | 35 |
| 60 | 55 | 50 | 120 | 40 | |
| 80 | 75 | ||||
| 400 | 60 | 55 | 50 | 180 | 60 |
| 80 | 75 | ||||
| 100 | 90 | ||||
| 500 | 80 | 75 | 50 | 250 | 75 |
| 100 | 90 | ||||
| 120 | 110 | ||||
| 650 | 100 | 90 | 50 | 350 | 100 |
| 120 | 110 | ||||
| 160 | 140 | 75 | 300 | ||
| 800 | 120 | 110 | 50 | 460 | 120 |
| 160 | 140 | 75 | 410 | ||
| 200 | 180 | ||||
| 1000 | 160 | 140 | 75 | 550 | 150 |
| 200 | 180 | ||||
| 240 | 220 | ||||
| 1200 | 160 | 140 | 75 | 690 | 180 |
| 200 | 180 | ||||
| 240 | 220 | ||||
| 300 | 280 | 105 | 630 | ||
| 1400 | 200 | 180 | 75 | 830 | 210 |
| 240 | 220 | ||||
| 300 | 280 | 105 | 770 | ||
| 400 | 360 | ||||
| 1600 | 200 | 180 | 75 | 970 | 240 |
| 240 | 220 | ||||
| 300 | 280 | 105 | 910 | ||
| 400 | 360 | ||||
| 1800 | 240 | 220 | 75 | 1110 | 270 |
| 300 | 280 | 105 | 1050 | ||
| 400 | 36 | ||||
| 500 | 460 | 125 | 1010 |
| Cleat type | Cleat height (mm) |
Bottom width (mm) |
Weight (kg/m) |
Min.drum.dia (mm) |
Production Lenght (m) |
| T | 20 | 40 | 0.28 | 75 | 3-5 |
| 25 | 40 | 0.3 | 75 | 3-5 | |
| 35 | 55 | 0.55 | 100 | 3-5 | |
| 40 | 70 | 0.6 | 125 | 3-5 | |
| 55 | 80 | 1.45 | 125 | 3-5 | |
| 75 | 80 | 1.8 | 150 | 3-5 | |
| 90 | 110 | 2.5 | 250 | 3-5 | |
| 110 | 110 | 2.8 | 315 | 3-5 | |
| 140 | 160 | 6.6 | 400 | 2.5 | |
| 180 | 160 | 8.3 | 500 | 2.5 | |
| 230 | 175 | 10.46 | 630 | 2.5 | |
| TS | 110 | 160 | 7.9 | 315 | 3 |
| 140 | 160 | 9.25 | 400 | 3 | |
| 180 | 160 | 11.5 | 500 | 3 | |
| 230 | 160 | 13.5 | 630 | 3 | |
| 250 | 160 | 14.6 | 630 | 3 | |
| 280 | 160 | 17.65 | 800 | 3 | |
| 360 | 160 | 19.25 | 10000 | 3 | |
| TC | 75 | 80 | 1.8 | 150 | 3-5 |
| 90 | 110 | 2.5 | 250 | 3-5 | |
| 110 | 110 | 2.8 | 315 | 3-5 | |
| 140 | 160 | 6.6 | 400 | 2.5 | |
| 180 | 160 | 83 | 500 | 2.5 | |
| 230 | 175 | 10.46 | 630 | 2.5 | |
| TCS | 110 | 160 | 7.9 | 315 | 3 |
| 140 | 160 | 9.25 | 400 | 3 | |
| 180 | 160 | 11.5 | 500 | 3 | |
| 230 | 160 | 13.5 | 630 | 3 | |
| 250 | 160 | 14.6 | 630 | 3 | |
| 280 | 160 | 17.65 | 800 | 3 | |
| 360 | 160 | 19.25 | 1000 | 3 |
FAQ
Q1. Are you a manufactuer?
Yes, we mainly produce Rubber conveyor belts and over 30 years.
Q2. What about the lead time?
15--20 days for mass production.
Q3. How to pay?
1) T/T or L/C through bank account
