Suitable for conveying hot material like powder or clump materials at high temperature.
Ideal for conveying sintered ores, cokes, soda ash, chemical fertilizer, slag and foundry.
It can resist high temperature.
The rubber compound used in the cover have been designed to avoid premature aging due to contact with any source of heat.
The belt carcass of this product is EP fabric of high modulus, low shrink, and high breaking tensile strength.
Cover rubber of this product uses EPDM rubber or chlorobutadiene rubber that has very good high temperature resistance.
The belt is made with extra care after mixing rubber with high temperature resistant materials, assembling and vulcanizing.
The belt can bear 250°C even 500°C high temperature for a short time.
It is suitable for use in cement, metallurgical and steel industry.
| EP Conveyor Belt | |||||||||
| Fabric specs | Ply thinkness(mm/p) | Strength series | Cover thickness | Width(mm) | |||||
| 2ply | 3ply | 4ply | 5ply | 6ply | Top | Bottom | |||
| EP-80 | 0.6 | 160 | 240 | 320 | 400 | 480 | 2.0-8 | 0.4-5 | 400-2500 |
| EP-100 | 0.75 | 200 | 300 | 400 | 500 | 600 | |||
| EP-150 | 1.00 | 300 | 450 | 500 | 750 | 900 | 500-2500 | ||
| EP-200 | 1.10 | 400 | 600 | 750 | 1000 | 1200 | |||
| EP-250 | 1.25 | 500 | 750 | 1000 | 1250 | 1500 | |||
| EP-300 | 1.35 | 600 | 900 | 1200 | 1500 | 1800 | 800-2500 | ||
| NN Conveyor Belt | ||||||||||
| Fabric specs | Ply thickness( mmp) |
Strength series(N/mm) | Cover Thickness(mm) |
Width | Length | |||||
| 2ply | 3ply | 4ply | 5ply | 6ply | Top | Bottom | mm | m | ||
| NN-100 | 0.75 | 200 | 300 | 400 | 500 | 600 | 1.5-8 | 0-4.5 | 400-1500 | ≤300 |
| NN-150 | 0.8 | 300 | 450 | 600 | 750 | 900 | ||||
| NN-200 | 0.9 | 400 | 600 | 800 | 1000 | 1200 | 500-1500 | |||
| NN-250 | 1.15 | 500 | 750 | 1000 | 1250 | 1500 | ||||
| NN-300 | 1.25 | 900 | 1200 | 1500 | 1800 | |||||
| NN-400 | 145 | 1600 | 2000 | 2400 | 800-1500 | |||||
| NN-500 | 1.55 | 2000 | 2500 | 3000 | ||||||
FAQ:
Q1. Are you a manufactuer?
Yes, we produce Rubber conveyor belts and conveyor rollers over 15 years.
Q2. What is the lead time?
10~30 days for bulk order production.
If urgent,we have green channel.
Q3. How to pay?
1. T/T or L/C through bank account.
Q4. How about package?
1. Inner is packed on round rubber core with 30cm diameter and 12cmx12cm square hole.
2. Outer is packed with one ply water-proof PP fabric.
3. With steel pallet on the bottom.
