The Anti Stick EP Conveyor Belt are not easy to adhere, easy to clean, resistant to aging, adapt to climate change, and have a long service life of antistatic. Secondly, due to the high modulus of elasticity and low elongation at break, the dimensional stability is good, the elongation is small, and after impregnation treatment, it is the development direction of the fabric core conveyor belt to achieve good adhesion with rubber and anti-stick EP conveyor belt. Finally, our products are cheap and high-quality, which is deeply loved by our customers.
The Anti Stick EP Conveyor Belt has good elasticity because it is elastic material, so when there is an impact on the case of less damage to it. Secondly, we have a large load capacity and can be used in medium and long distance fast transportation. And it has the characteristics of resistance to wear and corrosion. Finally, our water resistance is good in the wet environment, the tape's strong adhesion temperature does not decrease, and can extend the service life of the tape.
| Fabric Description | |||||||||||||
| Fabric type |
Fabric structure |
FabriC Specs |
Ply thick (mm/p) |
Strength Series(N/mm) | Cover thickness(mm) |
Width (mm) |
Length(mm) | ||||||
| Warp | Weft | 2ply | 3ply | 4ply | 5ply | 6ply | Upper | Lower | |||||
| EP (Polyester) |
E (Polyester) |
P (Nylon) |
EP80 | 0.60 | 160 | 240 | 320 | 400 | 480 | 2.0-8 | 0-4.5 | 400- 2200 |
≤250 |
| EP100 | 0.75 | 200 | 300 | 400 | 500 | 600 | |||||||
| EP150 | 1.00 | 300 | 450 | 600 | 750 | 900 | 500- 2200 |
||||||
| EP200 | 1.10 | 400 | 600 | 800 | 1000 | 1200 | |||||||
| EP250 | 1.25 | 500 | 750 | 1000 | 1250 | 1500 | |||||||
| EP300 | 1.35 | 600 | 900 | 1200 | 1500 | 1800 | |||||||
| EP350 | 1.45 | 1050 | 1400 | 1750 | 2100 | 800-2200 | |||||||
| EP400 | 1.55 | 1600 | 2000 | 2400 | 1000-2200 | ||||||||
| EP500 | 1.70 | 2000 | 2500 | 3000 | |||||||||
| Cover properties of the belt | |||||||
| GB Standard | |||||||
| Cover grade | Tensile strength >= |
Elongation >= |
Abrasive >= |
Tensile strength and elongation afer agingh |
|||
| Heavy(H) | 24Mpa | 240Kg/cm3 | 400% | 0.7cm3/1.61km | -25-+25 | ||
| Medium(M) | 18Mpa | 180Kg/cm3 | 350% | 0.8cm3/1.61km | -25-+25 | ||
| Light (L) | 15Mpa | 150Kg/cm3 | 300% | 1.0cm3/1.61km | -30-+30 | ||
| DIN Standard | |||||||
| Cover Grade | Tensile Strength(Mpa) | Abrasive(mm³) | Elongation(%) | ||||
| Z | 15 | 250 | 350 | ||||
| W | 18 | 90 | 400 | ||||
| Y | 20 | 150 | 400 | ||||
| X | 25 | 120 | 400 | ||||
| RMA Standard: | |||||||
| Cover Grade | Tension Strength(Mpa) | Abrasive(mm³ | Elongation(%) | ||||
| RMA- | 17 | 175 | 400 | ||||
| RMA-II | 14 | 250 | 350 | ||||
| AS or BS Stanard,or any customerized rubber cover quality is available. | |||||||
| Adhesion and elongation of the belt | |||||
| Belt Carcass |
Adhesive strength | Elongation | |||
| Between ply N/mm |
Between rubber and carcass N/mm | Longitudinal Elongation at break % |
Longitudinal elongation at reference load % |
||
| Rubber thick<=1.5 | Rubberthick>=1.5 | ||||
| EP material |
>=4.50 | >=23.15 | >=3.50 | 10 | 20 |
FAQ
Q: Are you a trading company or manufacturer?
A: We are a manufacturer of conveyor belt, chains belt and conveyor components. Our headquarter located in Shandong China, with two
large factories.
Q: How long is the delivery time?
A: Generally 5-7 working days. It depends on the quantity.
Q: Do you provide samples?
A: Yes, samples are available.
Q: How can I place an order? What is the whole process?
A: 1. Firstly, send us your detailed requirements(belt types, sizes, applications)by Email, WhatsApp, etc.
2. Then we will provide our best solution and quotation as per your requirements.(Samples available for testing if necessary.)
3. Once order confirmed and payment done, we will arrange production immediately.
4. Finally, goods will be send by sea/air/express etc.
