1. During transportation and storage, the conveyor belt should be kept clean and avoid direct sunlight or rain or snow, avoid contact with acids, alkali oils, organic solvents and other substances, and be away from the heating device one meter away.
2. During storage, the temperature in the warehouse should be kept between -18℃-40℃, and the relative temperature should be kept between 50-80%RH.
3. During the storage period, the product must be placed in rolls and not folded. During the storage period, it should be turned once every season.
4. Conveyor belts of different types and specifications are not suitable to be connected together, and the joints should preferably be glued.
5. The type, structure, specification and number of layers of the conveyor belt should be selected reasonably according to the conditions of use.
6. The running speed of the conveyor belt should generally not be as large as 2.5 m/s. The material with large lumpiness and abrasion and the use of a fixed plow-type unloading device should be as low as possible.
7. The diameter of the transmission roller of the conveyor and the cloth layer of the conveyor belt, the matching of the conveyor roller, the reversing roller, and the requirements for the roller groove angle should be selected reasonably according to the design requirements of the conveyor
8. The feeding direction should follow the running direction of the tape. In order to reduce the impact of the material on the tape when the material falls, a chute should be used to reduce the material falling distance; the tape receiving section should shorten the distance between the rollers and use buffer rollers to prevent material leakage. A soft and moderate baffle should be used on the belt side to prevent the baffle from being too hard and scratching the belt surface of the conveyor belt.
